- inflow in February and March, migration offshore when the water cools
- They will eat as soon as the tide starts to move.
- preferable light to medium spinning or baitcasting equipment
- 6 to 7-foot medium-to-stout rod with a soft tip
- 20 to 30 lb. braided line
- Fluorocarbon leader, 15-20 lb.
- Circle hook size # 1.0–3.0 to correspond with the size of the bait
- adequate weight to maintain the bait close to the bottom.
- 6–12 inch leader on a carolina rig. Consider switching to a split shot from a swivel.
- Minnows, greenbacks, sardines, finger mullet, shrimp, and other live bait
- California Gulp Shrimp Berkeley (scented and flavored work best)
- CA DOA
- shrimp-tipped bucktail jig
- With a focus on SLOWLY, retrieve the bait!
- To set the hook, do not jerk. Just start reeling in fast and continue until totally hooked.
- Be tolerant. After you’ve waited for the bump, count 10-15 seconds.
- To feel the bite, keep the rod tip raised.
- Hook live fish like minnows and dollars into the lip.
- Go even more slowly when you feel like you are retrieving slowly!
- When the water is cold at the beginning of winter, Florida flounder migrate offshore. In the early spring, they migrate inshore.
- Ask the staff at the local marina, who can provide information on where fishermen can find them.
- The majority of fishing reports don’t mention this species very much.
- Anglers may report catching flounder while fishing close to piers and docks.
- If you talk to other fisherman at the launch or on the piers, they probably won’t tell you where their “secret” areas are.
Recommendations for Flounder Fishing Line
Although mono is acceptable, some fishermen do use other kinds of line. But you don’t have to.
Test lines between 10 and 15 pounds work well. A 20-pound flourocarbon leader is also advised. You might cast lighter, but since you’re in saltwater and bigger fish can also attack your bait, most fishermen cast a little heavier to avoid bite-offs.
The largest website on the internet for travel and fishing advice is called Ultimate Fishing Site. To make it simpler for you to learn more about the species you want to catch and the locations you want to visit, we have now divided our main page into 300+ websites.
SUGGESTIONS FOR FISHING FROM PARTY BOATS
I use a fairly stiff 6′ to 6’6″ spinning or conventional rod and 15 to 25 pound test monofilament for Party Boat Fluke (Summer Flounder) fishing, depending on the weather. You must have a large stock of bank sinkers weighing between 3 and 12 ounces and be prepared for a variety of drift situations. If your bait isn’t on the bottom, you might as well head to the cabin. I don’t advise using braided line for party boat fishing because it can be quite challenging to untangle while fishing on a crowded boat.
To catch these fish, all you actually need is a solid, straightforward, affordable fluke rig, which should include a Mustad 37162 2/0 to 4/0 wide gap hook (preferably gold), a 36-inch 20-pound mono leader, and a three-way swivel with sinker clip. Fluorocarbon leads are overused, in my opinion, although some individuals still use them. Fluorocarbon leaders are often stiffer and not required unless you are fishing in relatively shallow, clear water, in which case they are ideal.
Keep your bait moving if your drift is slow if you want to catch fluke in huge quantities. Raise your rod periodically to keep your bait moving. Put the rod down; I’d rather manually pop the line. By holding the line in your hand, you could feel the very first take on your bait. As soon as you notice the fish take the line, let go of it, lift the rod, and give it a little extra slack before setting the hook and counting to five. This method is incredibly efficient when using a circle hook, but you just start cranking without first placing the hook. The little boys won’t need to be gut hooked because of this.
Packing some live minnows (Killies) for the trip is always a good idea. Squid and Atlantic Silversides, which are used for spearing, are frequently provided by party boats. I’ve found that taking a small lunch cooler with wet newspaper, a tiny 1/2 pint frozen water bottle, and some seaweed will keep a pint of killies fresh for pretty much the entire day. It’s challenging to keep them alive in a pail of water unless you have an aerator. Change your squid strips and spearing sometimes if you don’t get any bites after a few throws or if your spearing stops working. It’s also a good idea to have some fake bait on hand. Having a good selection of 1 1/2 to 2-inch grubs in several colors, particularly white, chartreuse, purple, yellow, and red, will significantly increase your catches when fluke latches on a color. By sliding one up the hook shank to the eyelet, you can use it in conjunction with your squid/spearing or killie combo when fishing. When the fishing is slow, I begin to change colors until I find something that gets a reaction. Another great fake is from Berkley Saltwater Gulp, especially the swimming mullet or minnows in sizes of 3 or 4 inches in white or chartreuse. Without using any additional bait, I’ve seen people successfully catch a lot of fluke on them, especially when the color is chartreuse. When rigged on a 2-4oz spro bucktail, a teaser hook and one of these gulps are proving to be an effective duo for catching fluke.
I have a couple of Shimano Calcutta 100 reels that were given to me by an uncle who was a bass fisherman and were only used for freshwater. I know that many people use braid for flounder fishing, but I have some reels that are probably spooled with about 12 to 15 pound test mono. Is this strong enough to catch flounder with this mono, or do I need to respool them with something stronger? I don’t fish for flounder very often, but I was considering giving it a go tomorrow. Can someone please advise me as to whether the line is okay or whether I’m undergunned? Any assistance would be greatly appreciated.
The ideal pound test for inshore fishing is what?
For inshore fishing, you need a leader made of fluorocarbon or monofilament that has a 30 pound test weight. This is due to the fact that it refracts underwater, making it nearly undetectable to fish. Additionally, fluorocarbon and monofilament are very abrasion-resistant, making them ideal for use while fishing close to manmade structures like docks and mangroves.
How many pounds should I test?
A 4-12 lb test is typical in freshwater. A 4 lb test line is suitable for tiny trout and sunfish. 6-8 lb test line is typically used for bass or general freshwater fishing. When utilizing light gear in seawater, 12-15 il test is typical for lesser species, whereas 17-20 lb test enables you to target larger fish.
What is the weight restriction when fishing for flounder?
What many fishermen around the nation refer to as a Carolina rig is one of the most well-liked live bait rigs for flounder. Depending on the depth and current where you are fishing, pick a weight between 1/8 and 1 ounce, and attach it to the main line. After that, knot on a swivel, add a 2 to 4 foot leader, and finish by adding a small circular hook.
What is the ideal set-up for fishing for flounder?
Excellent flounder rigs The fishing line for this flounder fishing rig is threaded through an egg, bullet, or flat sinker before being attached to a barrel swivel, just like the basic fish-finder. Next, attach the opposite end of the barrel swivel with a two-foot stretch of mono that is lighter than the main line.
What kind of Gulp bait works well with flounder?
The best option for fishing flounder is probably using gulp shrimp fishing lures. The easiest approach to catch flounder is to bounce those white 3 or 4 inch Gulp shrimp bodies within 6 inches of the bottom with a 1/8 or 1/4 ounce chartreuse jig head.
What places do flounder frequent?
Who lives there? In estuaries, creeks, and rivers as well as throughout the Eastern Seaboard, flounder are saltwater fish that frequently congregate near to the shore. They move to the ocean over the winter and typically don’t return to shallow waters until April.
What is the ideal fishing rod and reel for flounder?
Every flounder and fluke angler requires a light conventional outfit as their second rod and reel set. These are employed while fishing close a substantial structure. Anglers frequently fish in deeper water with strong currents, which calls for heavier sinkers. Compared to spinning rigs, these lightweight conventional outfits are more preferable for that application.
These traditional boat rods are often a little bit shorter. For the majority of inshore applications for fishing for fluke and flounder, a 6 foot to 6 1/2 foot medium action rod with a 30 series reel is suitable. The same gear can be used for a variety of other species, including bluefish, striped bass, and blackfish. Many seasoned saltwater fisherman already own several of these types of rods since they are such a versatile equipment.
What sensation does a flounder bite cause?
Typically, a flounder bite does not have to be painful; in other cases, it may not even feel like a bite at all. There will also be moments when it appears as though your retrieval simply stopped without a thump. If this happens, either you snagged something on the bottom or a flounder caught the tail of your Z-Man bait.
How big should my flounder hooks be?
The big mouth and aggressive character of summer flounder make 4/0 to 6/0 sized hooks ideal for use since they lessen the chance of gut hooking a fish. Anglers who target summer flounder are most frequently connected with and drawn to wide gap hooks. These hooks are frequently known as fluke hooks in retail settings.
What time of year is ideal for flounder fishing?
Although flounder can be caught year-round, the fall and early winter are when they are most concentrated and easiest to catch. Depending on the weather and how cold it gets, the greatest rod and reel fishing begins in mid-September and lasts through December, occasionally well into January.