How To Drift Eggs For Salmon?

large silver salmon drifted in

A very efficient method of catching salmon and steelhead is drift fishing. You can present your lure directly in front of the fish by bobbing or drifting it down the river’s bottom. Eggs, pink worms, cheaters, floating beads and yarn, and more can all be used for drift fishing. The key is to not use too much weight so that your lure doesn’t bounce or travel downstream, but just enough to bring you to the bottom so that you can feel it as you drift down the bottom. I prefer to use a “slinky” weight since I find it simpler to detect strikes and it tends to get snagged on the bottom less. Slinky weights are nothing more than mesh tubes packed with tiny lead balls.

Maintaining constant contact with your lure as you feel it bounce along the bottom is essential for successful drift fishing. The strikes range from powerful, barely audible bangs to delicate, scarcely perceptible nibbles. Steelhead strikes are frequently observed to be quite light and to just appear as though your line has stopped going downstream. A sensitive rod is necessary in order to be able to feel when a fish accepts the lure in its mouth for this reason. There are a few considerations while fishing these setups through a typical drift or section of river. Work your way down from the top of the drift to the bottom first. Cast your lure out and slightly upstream, allowing it to settle to the bottom and float downward. Make sure to drift your lure through all of the areas of the water where fish might be holding. Salmon and steelhead hold in deep pools, tailouts, current seams, and around structures. Make sure there is no slack on your line when you run your bait through the drift because if there is, you won’t feel or see the strike and will subsequently miss a lot of fish. When your drift reaches the bottom, reel it in and start over by casting from a little different angle.

You will require:

  • a clip swivel of average size
  • Weight. either slinky weight or pierced pencil lead (mesh tubing filled with lead balls).
  • Baitholder knot used to attach the leader to a regular octopus hook.
  • Spin-n-glow, cheater, floating beads, etc.
  • Dye-infused yarn


  • Toothpick
  • Scent

Steps for rigging

  • Connect your main line to the clip swivel.
  • Put a weight on the clip.
  • Attach your leader to the swivel’s other end.
  • Your floating bead should be slid onto the leader.
  • Use a bait holder knot to attach your leader to your octopus hook.
  • In the bait holder, place yarn or bait such as eggs or sand shrimp.

When I’m not using bait for fishing, I like to utilize smell. The thread or bead will attract fish much more readily if sandshrimp smell is applied to it. Additionally, I use a toothpick in still water to prevent the floating bead from going up the leader and away from the hook. Pink worms can also be fished using a drift rig. Simply use a hook threader or long sewing needle to attach the worm to your leader, then fish it with a corky or cheater.

Rogue fishing

A frequent technique for catching fish is drift fishing, which involves casting a line upstream, letting it float through a run or pool, and then reeling it in to repeat the procedure. From a boat that is anchored or the land, you can drift fish. Generally speaking, the goal is to weight your setup such that it bounces along the bottom, contacting every few feet, at a speed that is close to that of the current. Your bait will flow downstream more slowly with more weight and more quickly with less weight. Working the entire run from the shore closest to you to the shore farthest away, as well as from the upstream end of the run (near the finish of the riffle) to the downstream end of the run (near the start of the next riffle), is the standard method (Figure 1). In congested situations, you might only need to elbow your way into a group of anglers and fish while standing still. Until you reach a 45-degree angle downstream, let your bait bounce along after you cast at a 30- to 45-degree angle upstream. Replay the previous action. To get a fish to take your offering in its mouth, you must bounce it along the bottom.

Anglers who are just starting out frequently struggle to distinguish between when a fish has taken their bait and when their gear has snagged on a rock. An angler gradually gains an understanding of the distinction and knows when to place the hook and when to gently guide the equipment off the rocks.

An 8 1/2- or 9-foot rod with a line weight rating of 15 to 30 pounds and either a spinning or baitcasting reel are standard components of drift fishing equipment. Use 20–25 pound line for larger fish, including Chinook salmon. Use 10-15 pound line for smaller fish, such as pink salmon. Anglers have access to a virtually limitless range of weights, lures, floats, and/or baits. A snap swivel at the end of the mainline, a leader from 12 to 48 inches to a single hook with an egg loop, a corky above the hook, and yarn on the hook are common components of a salmon setup (Photo 1). For weight, insert a “pencil” lead or just the snap swivel through the parachute cord of a “slinky” weight before inserting it into a piece of 3/4″ long rubber tubing (Photos 2 and 3). This rig can be enhanced with bait or scent. The most popular baits to add to this setup are sand shrimp and salmon roe, but many other types can be employed as well. You can fish with just bait or use a winged bobber (Photo 4) or other drift bobbers in place of a corky and yarn rig. You can drift with spoons or spinners, bouncing them along the bottom and slowly retrieving them after removing the weight and corky arrangement.

How should I use hooks for salmon eggs?

The very sharp point of Mustad’s Salmon Egg Hooks is curved to hold eggs while the hooks’ forged bend boosts bend strength by about 25%, effectively removing the risk of a large fish straightening the hook. The hooks also have a small bait holder slice in the shank. Model 9263A from the manufacturer

What is the ideal salmon bait?

For good reason, live bait has been utilized for millennia. Live bait is actually moving in the water and is alive. Additionally, live bait releases its natural odor into the water, increasing its allure to fish. Salmon roe is the most typical live bait used in salmon fishing (eggs). They are among the salmons’ most delicious delicacies and are typically inexpensive, colorful, and bright.

Minnows are also another option. Almost any freshwater fish will be drawn to and eat minnows, so they are always a wise choice. Just make sure they are alive before you bait the minnows on your hook.

Another choice is sand shrimp. The most effective bait for catching salmon is typically sand shrimp, but they are also the most expensive and challenging to rig. They won’t let you down, though, if you have the time and the money.

What size hooks should I use for salmon eggs?

It serves as a hook, and a very good one at that. Snell rigs and live bait work well with it. I would advise choosing a fly with a slightly longer shank made for scud or caddis larvae if you want to tie egg flies. For most uses, size 10 is a little bit too small. Size 10 or 8 should generally be used when stringing individual salmon eggs. You should generally use size 6 or larger for using spawn (depending on how big you tie your spawn sacks).

How is salmon caught from the shore?

Drift fishing is one of the best methods for catching salmon from the coast. A dropper line between 12 and 36 inches long that is fastened to a snap swivel has a weight on it. The main fishing line is attached to the swivel. The main line is then strung with several beads, and the end is secured with a swivel. The lure or baited hook is tied to the end of a 4- to 6-foot leader that is fastened to the swivel. Then, this apparatus can be thrown into the water upstream and left to bob along the bottom as it drifts downstream with the current. Shorten your first cast and let the rig drift. Reel in and extend your cast a little if there is no strike. Continue in this manner as you cross the river.

What kind of hook works best for salmon?

The best hooks for float fishing will have the proper size, color, form, and strength. They also need to be really sharp. They must also be the appropriate hook for the circumstance. The Raven Specimen, the Daiichi 1150, and the Gamakatsu Octopus Hook are the three best hooks for float fishing.

In this article, I’ll go over how I use various hook sizes for various types of water, various baits, and various fish sizes.

For the majority of regular fishing circumstances, my guides and I like to utilize hooks like the Raven Specimen hook, but when I require a stealthier approach, I like the Daiichi 1150 Heavy Wide-Gape Hooks.

If you utilize the appropriate sizes at the appropriate times, you can’t go wrong with the two hooks.

For fishing steelhead and trout, the Gamakatsu Octopus hook and the Raven Specialist hook are also excellent options.

If you utilize the proper size and shape, simply these four hooks will work in almost every situation on the river.

Other excellent and well-known float fishing hooks include the Daiichi Salmon Egg Hooks, which are good for single eggs, the Raven Sedge Hook, which is comparable to the Daiichi 1150 hooks, and the well-known Redwing Tackle Blackbird Sabretooth Premium hooks, which is a very popular hook for great lakes salmon.

Which hues of lures do salmon prefer?

The best salmon lures for rivers, broadly speaking, include spinners, buoyant drift rigs, casting spoons, flies, and wide-wobbling diving plugs. Many river salmon lures are boosted with a bright color, typically orange or red/pink, and silver or chrome are particularly common hard-lure finishes.

When is the optimum time of day to fish for salmon?

Salmon fishing is generally best during the magical hours of early morning just before sunrise and late evening just after sunset. Moon phases, high and low tides, and even the approach of low-pressure systems can improve your opportunity.

Many fisherman claim that the best fishing occurs during downpours. Salmon strikes can frequently occur in abrupt surges as a result of raindrops vibrating the water’s surface in an ocean, river, or lake.

All forms of night fishing are unquestionably impacted by the moon. The moon controls tides in addition to lighting up underwater lures. The 3 or 4 days around the new moon and the 3 or 4 days around the full moon are frequently the finest moon phases for salmon.

These window times are ideal for both daytime and nighttime fishing. Take note of the architecture below the surface. Your luck will increase if you play that structure in accordance with the ebb and flow of the tide.