Which Way Does A Salmon Flasher Go?

It is a reality that many new flasher users approach the topic in an awkward way. Trolling flashers backward is one of the most typical errors people make when using them. The front is the slender, tapering end.

As it is rolled, the taper causes the flasher to spin. You should knot this portion to the front of your leader, which is connected to your main fishing line, first. The flasher’s large rear piece kicks back and forth, producing loud vibrations that draw fish. It will serve as the anchor for your tail leader, which you will then secure with your bait or hook.

There are six sections in this flasher rigging section. Each section covers a different topic related to flashers that can increase your salmon catch.

Sport and commercial fishers have long utilized traditional 8″ and 11″ flashers. They are the best salmon-catching equipment in the world when properly rigged. Typically, these flashers are constructed of plastic in vivid colors and feature colored tape on both sides. Glow-in-the-dark tape, tape in different colors, and embossed silver tape are all highly well-liked. To determine what looks best in various situations, experiment with a range of colors.

Combo Flashers

A flasher combination can frequently be the difference between success and failure in deep or dark, murky water. They compliment the action and smell of a bait or lure by drawing the salmon with their brightness and action.

I enjoy using plastic flashers with a broad rotation in conjunction with an anchovy or herring rigged on a 3- to 4-foot leader behind the flasher. The metal Martin or chrome Gold Star flashers are excellent for this, as are the 11-inch Bechhold plastic flashers.

Multicolored flashers may occasionally contribute to strikes. The Mylar bodies in green and silver are effective producers. When fishing near krill or squid schools, silver flashers with red accent work well. All-white and glow-finish flashers can be fatal in dark, murky water.

A flasher and artificial lure combination works well if you prefer to troll with hardware rather than fiddle with bait. The flasher and plastic skirt, often known as a hoochie locally, is one of the best setups. These pearl white or natural-finish colored plastic skirts are top-notch makers.

To rig one up for trolling, attach a 1/0 swivel to a 40-pound fluoro leader with the hoochie, then use pliers to attach a 5/0 to 6/0 open-eye barbless Siwash hook to the swivel. You may alternatively use a gum pucky inside the hoochie’s head in place of the swivel, and then attach your hook to it. Depending on how much action you desire, the length of the leader varies; the shorter the leader, the more active the hoochie.

A useful leader length is between 22 and 28 inches, or two to two and a half times the flasher’s length.

The flasher gives the hoochie a snappy spinning motion in addition to the light and vibration that draw fish. You’re ready to go once you’ve tied the leader to the flasher’s back side.

Dodgers vs. Flashers

The front is the end. The tail of the flasher is attached to a bait or lure at the back.

as seen in the picture. The dodger does not spin and is uniform on both ends. As it is trod, it behaves like a pendulum swinging back and forth. When you troll too quickly and the dodger spins, you no longer have access to its powerful fish-attracting power. Both dodgers and flashers are effective at luring salmon. Salmon can sense them from thirty to forty yards away due to the powerful vibrations that their activity causes in the water. These vibrations, which are similar to those produced by a feeding salmon’s tail during an attack, are what attracts salmon to them. Salmon nearby will charge the flasher or dodger in an effort to catch a meal.

The rigging of flashers and dodgers differs significantly. You might catch a few fish if you rig them improperly. You will catch 10 times as many fish if you properly fix them. Flashers are designed to follow your weight, planer, or downrigger release from five to twenty feet behind. Your bait or lure should then be placed three to four feet behind the flasher (tail leader). A mere 26 inches or so separate the size 0 (nine inch) dodger from your weight or release. The tail leader to the bait should then be closely linked and around 20 inches behind the dodger. Both of these devices’ rigging specifications, especially the tail leader length, are crucial.

Flashers are less sensitive to speed than dodgers. They will therefore function better than a dodger throughout a larger range of trolling speeds. Dodgers typically excel at a single pace. If you go faster than this, the dodger spins and stops luring fish to you.

Flashers with a Rapid Release

The quick-release flasher is an additional tactic. On my boat, both novice and experienced anglers liked fighting fish without the flasher drag in the water and avoided that slack strain when the flasher breaks the surface. You can either tweak your preferred flasher to pop off or purchase a quick-release flasher like the Gibbs Farr Better Flasher. You may buy a variety of pop-off flasher attachments or create your own rather easy using a standard rectangle flasher. You’ll need 80-lb fishing line, crimps, a large clear bead, a peg (wood or plastic), and a snap hook to construct your own. Look for a peg that will snugly fit inside the welded ring hole. Then, three-quarters of the way up from the bottom of the peg, drill a little hole to accommodate the fishing line. On the fat side of the flasher, remove the welded ring securing the snap swivel. Now attempt to insert the peg into the flasher hole that was previously occupied by the welded ring. As soon as the fish sets the hook, it should fit snugly and pop off. Swivel-crimp the fishing line’s one end, then sew a bead to the crimp. Snap a hook onto the peg after it has been inserted through the line. You’ve just made a rapid release flasher on your own.

Regardless of the flasher and hoochie setup you choose, you’ll need to test different leader lengths. If you locate it, the fish will come after you.

Run Flashers Behind the Boat How Far?

The length of the line can also be changed when positioning the flasher behind the downrigger. Hot Spot advises extending the line to the flasher for the first few casts at a distance of around 18 feet from the downrigger clip. This sum may be raised or lowered. The likelihood of snagging up the gear on one side of the boat with the gear on the other side increases as the amount is increased, especially if the tides are strong. I usually shorten the distance that my rigs are set out when I’m fishing in strong tides, windy weather, or regions where there are plenty of boats in order to lower the likelihood of issues.

What you’ll need

Connect the swivel of the flasher to the line that emerges from the rod. The end of the flasher that is rounded or narrow is tied to the line. Specific instructions for tying each type of flasher can be found on the packaging it comes in.

3 to 4 feet of 20 to 30 pound test leader should be tied to the flasher’s opposite end’s swivel.

Attach a mooching rig to the leader’s end. Place a sliced herring plug on each of the mooching rig’s two hooks. Instead of using the mooching rig, tie a lure to the end of the leader.

Connect the line that emerges from the rod to the downrigger’s cable’s clip. Between the clip and the flasher, leave ten to twenty feet of line. Let the flasher and bait troll behind the downrigger ball as you lower it into the water.

How is a Rotary salmon Killer rigged?

Unrigged chartreuse rotary salmon killer head This is the original Pro-Troll Rotary Salmon Killer’s bait head. Any hook configuration can be used to rig it. A single hook is preferred by some anglers, but tandum hooks are preferred by others. In order to catch more fish, it is best to fix your hook so that it will trail immediately behind or at the tail of your baitfish. To rig it, gently pry apart the plastic head until your baitfish’s head is caught between the three protruding pins. The diagonal fin on the back of the baitholder is what gives it its irregular motion. Your bait will now roll erratically, like a wounded fish. Dial the Roto Chip baitholder option from the main menu to show how this item is commonly setup.

For more than 20 years, the Rotary Salmon Killer baitholder has ruled the market. For proud fishermen, it has brought in hundreds of thousands of salmon. It is simple to rig and provides a lethal rotating and shaking movement to a bait. It doesn’t need toothpicks or any other rigging tools. There are three of the item in a pack.

Are flasher rigs baited?

Fasher rigs are now a widely used technique for catching fish. The vast majority of fish species that swim in the ocean can be caught using flasher rigs because of their versatility. A flasher rig is just a dropper rig with the hook adorned with feathers or other brightly colored, sparkly materials to assist attract the fish to bite.

These rigs are available in a range of colors and hook designs. The circular hook is the most popular type of hook, but other options include long shank and octopus hook setups. When utilizing conventional hook rigs, you should hook the fish as soon as you sense a bite.

However, you shouldn’t cast a recurve or circle hook-equipped flasher rig. When using circle hooks on this rig, the idea is to wind the handle rather than strike the fish when you feel bites begin to cause the rod tip to bounce. This will cause the hook to roll into the jaw’s side. If you strike while using a circle hook, the hook will frequently merely be pulled out of the fish’s mouth.

Cut your bait into bite-sized cubes to prevent pickers from grabbing part of it and yanking it from the hook. Small cut baits are best fished on flasher rigs since the flash will often inspire the fish to get aggressive and consume the entire bait at once.

How far behind a flasher should a spoon be?

It’s only a matter of preference. I position it 3 to 10 feet in front of the dummy flasher. The dummy flasher’s purpose is to draw fish to your spoon. I think that if your spoon is too close to the flasher, the flasher will attract the fish’s attention instead of the spoon.

What sort of leader is best for salmon fishing?

Specialty leads for Alaska, monofilament and fluorocarbon tippet, and tapered leaders. Use Trout Leaders sparingly while fishing for salmon or steelhead, as a general rule. As an alternative, a Salmon Steelhead Leader is your best pick if you are casting massive, heavy streamers.

Rio Salmon/Steelhead Leaders pair excellently with FC Sniper Fluorocarbon Tippet or Maxima Ultragreen Tippet.

What is the ideal trolling speed for lake trout?

Around 1.5 to 2.0 mph is the preferred trolling speed for trout. Although trout are often looking to hunt food items, slower speeds may be more effective in cold water during the winter. Allow the fish to choose the speed that will attract a bite. Start trolling in S-patterns at 1.5 mph. A gradual turn to the left, for instance, will cause the inside rods on the port side of the boat to move more slowly than the outside rods on the starboard side. Fish that bite while using slower or quicker gear will show the ideal pace.