Seventy-five oyster shells are used to decorate the chandelier. The chandelier’s oyster shells were strung together with wire after being threaded through holes made with a dremel tool (also see Drill Shells).
The oyster shell chandelier is the result of much labor of love, much like the well-known and stunning Faux Capiz Chandelier.
Chef Richard B. and Rach’s Bucatini with Bacon and Creamy Onion Sauce
Roxanne, the DIY guru and interior designer behind the site The Honeycomb Home, made her own version of a $700 professional chandelier for a friend after falling in love with it. Here’s how you get the same effect with a few inexpensive materials!
Materials: Chandelier frame ($12 online, according to Roxanne! shells in a bag with holes already drilled Fishing line
Start by threading fishing line through the shells’ openings and knotting it. Continue till the length is what you want. As Roxanne says, “You can make it as long or as short as you want it to be.”
The chandelier frame should be secured with “O” rings, and the ends of each shell strand should be fastened with metal hooks. The strands should then be hooked to each “O” ring.
Voila! What a simple approach to achieve a breezy, beach appearance for a much lower cost.
Hanging oyster shells
What you’ll need to dress it up is
– Countless oyster shells (these were found and cleaned by Mother and Daddy-O). On mine, I used about 75 shells, but your mileage may vary depending on the size of your shells. – Spray paint in stainless steel from Krylon (because I thought this would blend in with the shells) – A 1/16″ drill bit for a Dremel.
– Wire for stringing your shells together 1. Here is how the chandelier appeared when it was still in the box. I taped off all the electrical components first, then I started spray painting.
2. In the meantime, Honey started piercing holes in the shells.
3. In order to have something from which to hang the shells, I first wound a length of wire around the chandelier’s top. Although some of the paint was scratched off, as you can see, you can hardly tell now that it is hanging. From here, you just secure shells all around the chandelier with the wire. As I set up each shell, it took a lot of trial and error to determine what looked best. 4. After finishing the top piece in its entirety, I waited for it to be hung before working on the bottom shells. This made it simpler to hang and allowed me to preview the final product as I worked on it. I used wire to round the chandelier’s base and join the bottom shells together similarly to #3 above.
5. I gathered all of the hanging strands in the bottom centre using a tiny nut. And I dangled one last shell from the base.
Considering that I prefer the short and sweet variety, it was a really time-consuming job and one of my longest ever, but it resulted in one of my favorite items in the entire house! Keep checking back because I have so much more to share this week!
How are oyster shells fastened to wood?
I arrange the oyster shells on the wood in a pattern before gluing them to it. I chose shells with similar sizes. There are numerous techniques for adhering oyster shells to wood. Use any epoxy glue or a glue stick. The Gorilla glue bond is one of my favorites. Don’t forget to wear gloves. Find out more about the ideal glue for seashells here.
Wet the oyster shell first, then cover it with a thin layer of glue. Within a few minutes of placement on the wood, the glue begins to bubble. Any leaks around the shell should be cleaned. Dry for a full day.
I’m thrilled with the way my oyster shell bookends turned out. They look fantastic on my new home’s bookshelf. I can now concentrate on producing additional items for my shop. They take some time to make, so they’re not a quick project. I hope you approve.
Can I create a chandelier on my own?
Steel tubing and fittings are the best choice for creating an industrial-style chandelier or light fixture. They can be used to construct a unique fixture, or you can build everything from scratch.
What can you make out of discarded oyster shells?
You’ve just finished devouring a platter of delectable oysters, and the plate is now covered in shells. Here are various alternatives to trashing your used oyster shells for usage or disposal. We would like to express our sincere gratitude to everyone who submitted us suggestions, as many of these came from our online community.
Calcium carbonate, also known as chalk, which makes up the majority of oyster shells, can help buffer soil acidity and supply plants and microorganisms with essential calcium. Additionally, the oyster shell’s texture aids in preventing soil compaction, which can enhance soil aeration. Compost, soil amendments, and mulch can all be made from oyster shells. Just be sure to disinfect the oyster shells by boiling them before using them in your garden. Your oyster shells’ efficacy as a soil component and in compost can be increased by crushing them.
Did you know that Americans use oyster shells to line driveways and even the walks by their homes? Oysters can be a stunning, cost-effective, and environmentally friendly landscape item that even works to stop erosion.
Beautiful wreaths, decorations, and ornaments can be made from cleaned oyster shells. The robust shells are useful for a number of crafts, and the smooth interior shell is ideal for painting.
You might think about contacting an oyster shell recycling organization if you consume a lot of oysters (or if you purchased one of our bulk CSA add-ons). Programs for raising oysters, like the Mass Oyster Project, gather and clean the shells before using them to plant seeds for new oyster beds. The Mass Oyster Project and shell recycling may be read more about here.
What other ideas do you have for using your oyster shells? Comment below and let us know!
How are oyster shells drilled for holes?
Just enough water should be added to cover the sponge. Shell should be placed on sponge, top-side down, and held firmly with your fingers as in the illustration (the water will prevent the drill from overheating and the shell from splitting). Drill slowly through shell while keeping edges barely submerged.
Why do capiz shells are advised to be utilized in producing chandeliers and lampshades?
Capiz shells, commonly referred to as windowpane oyster shells, have a long history of decorative use, beginning in the Philippines as a glass replacement for window panes. These shells are prized for their transparency, which when woven into chandeliers, mobiles, or lampshades produces an almost ethereal impression. The shell strands used to create a capiz chandelier must be evenly balanced throughout for the decoration to hang properly.
Which adhesive is suitable for oyster shells?
To make and decorate with seashells, use Seashell Glue. This adhesive works well to adhere any kind of shell to a variety of materials, including wood, terra cotta, glass, cardboard, metal, and more.
Capiz shells can you cut?
Even before capiz shells were once again in style a few years ago, I have always adored them. Born in the Philippines (where the majority of capiz shells are produced and where a ton of items are created from capiz), I was an Air Force child who had a lovely hanging capiz windchime that adorned my room no matter where we lived. This year, while out shopping, I came across some gorgeous capiz shell Christmas trees and thought those would be the ideal thing to attempt to make myself.
Making my own capiz Christmas tree centerpiece seemed fated since I already had a large quantity of capiz shells that I’d purchased (for an abandoned headboard project).
The capiz shells I got were a little too large for this project, but I found that scissors worked fairly well to chop them. The most of the time, the shells cut readily and cleanly with some little breaking. with straight lines, at least. I wouldn’t attempt to cut any complicated shapes.
Simply adhere the capiz shells on the FloraCraft foam cone with glue. You can choose the perfect size for your needs from a variety of sizes, or you can make your own glistening capiz forest!
What, you don’t just so happen to be sitting around with a stash of capiz shells like I do? Actually, waxed paper makes a fantastic imitation capiz shell! Additionally, it is even simpler to cut than the shells.
I adore the centerpiece of my glistening Christmas tree. When I set the trees out next to a few candles at night, I can’t wait to watch the light play off the surface. It’s a winter wonderland aesthetic that reminds me of my own family history and memories—and it’s one of my personal favorite things about the holiday season!
Do you need more entertaining, creative Christmas ideas? They are all included in a free e-book called FloraCraft(r) Make It: Fun(r) Foam.
How is a shell strung?
Utilizing a sharp, pointed nail and hammer, you strike each shell in the center before stringing them three inches apart and tying a knot in the fishing line beneath each hole. Put dot of glue to the knot. Make each string of shells about 2 feet long, depending to your desired length.